Qmobile i6 Metal One – MT6580 – Firmware- Free Download Flash File 

 

Qmobile i6 Metal One MT6580 Firmware Flash File.

preloader_v2800.bin

MT6580_QMobile_i6_Metal_ONE_i6_Metal_ONE_6.0_ALPS.W10.24.p0

Initial Steps to Install Firmware on Qmobile i6 Metal One. 

  1. Download and install MTK  android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Qmobile i6 Metal One. 

 

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  android USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 80% charging before this process
  5. switch off your mobile remove the battery (if removable)  And re insert the battery and plug the USB cable in charging socket.
  6. Now open SPflash tool.exe from yours Hard drive location.
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button, And select tab farmet and download.
  9. After locating the scatter tab, click on the download button.
  10. Now connect your smart phone with a USB cable and press volume up+ or volume down- key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool.
  12. Close sp flash tool on your computer and unplug  mobile phone.
  13. Power on the phone and enjoy.
  14. After flashing process starts and might take up to 8-10 minutes. So keep patience and wait.
  15. After flashing any problem please tell me in comments. Thanks

 

 

Download Link

Add a Comment

Your email address will not be published. Required fields are marked *